Requirements:-
PC/Laptop
Bypass
Python
Libusb
Extracted OFP
Procedure:-
1) Run Python Installer
You need to do as in the screenshot (Add python to path)
2) Run CMD
3) Enter command
pip install pyusb pyserial json5
4) Exit CMD
5) Go to the Driver folder
6) Go to the Driver folder and right-click on the cdc-acm.inf file, then click Install
7) Close Window
8) Install libusb and run
9) Select Install device filter & Click Next
10) Install inf from driver folder (Read Notes)
11) Connect the smartphone with the Vol+ button pressed (Read Notes)
12) Select and install the device that appears (Mediatek USB Port or Serial Port)
13) Go to the Bypass folder
14) Launching brom.bat
15) connect device with holding Vol+ and Vol-
16) output should be like this
17) now open FlashTool.exe
18) After selecting the Scatter file from the images folder in the line Scatter-loading File and click Download (make sure it is in Download only) and untick these partitions:-
i>Opposerver 2
ii>Special preload
iii>My custom
iv>Cdt engineering
After flashing green checkmark will appears then hold volume up and power key
SP TOOL AFTER FLASHING DONE
0 Comments